Liquefied petroleum gas cylinders are currently the most common type of equipment in the industry. This type of equipment can store a lot of gas, and it can bring good use guarantee in later use. In fact, most manufacturers simply don’t know how to do it. For maintenance, if you want to maintain this equipment, you must know the relevant maintenance methods in advance. At present, what kind of maintenance methods are better?

　　1. Keep it clean

　　No matter when, as long as it is to use liquefied Petroleum Gas Cylinder, it must be cleaned during actual use. There is no doubt about this. When cleaning, make sure that the inside and outside are clean, and The most important thing is to avoid roasting or blanching the cylinder when cleaning.

　　2. Leave excess pressure

　　Any time you use a liquefied Petroleum Gas Cylinder, you must close the valve in time after the use is completed, and you must not let all the gas volatilize, so that there is residual pressure inside.

　　3. Follow the replacement procedure

　　If you want to replace the equipment, you must replace it in order when you replace it. It is very important to see if the current rubber cushion is intact. This is very important. At the same time, you must look at the current pressure reducing valve to see if there is any on it. Aging phenomenon.

　　If you want to do a good job in theliquefied Petroleum Gas Cylinder, you must understand some of the above maintenance methods.